Jump to content
Storm trooper

Deano’s Garden Railway.

Recommended Posts

Hi Deano, Thomas,  I have being  told to use heavier wire for the main line, some modelers use house wire, too thick for me, the thickness wire I use is about 1mm thick for the main line and using thinner wire for the station track  blocks close to the panel., that price is pretty good, I buy by the meter , working out on the length of the module . I buy at time enough wire for a few blocks , so there isn't too much wastage.

Did  a bit more work on the corner module today, two more blocks to make bus wire harness.

Tony from cloudy down under.

Share this post


Link to post
Share on other sites

Hello Tony,
So you use cables as they are installed in cars with 1mm² ??
I use cable with 0,25mm² and these should be at 16 to 20 volts for min. 5A be good.
That would be about 100 watts of transferable power (or 0.1 kilowatts).
That seems to me sufficient even for DCC.
For cables with 1mm², you could chase through 15 to 16A at 16V, so an output of about 250W.
I do not know a transformer for DC which creates more than 70W.

For a cable of 1mm², the price is okay.
However, I do not want to offend you, but I think you spend money unnecessarily.

It is not a problem to use thick cables, I also use house cables that I have from the construction of our house still there.
But spending a lot of money in my opinion is not necessary.

Best Regards

Thomas

Edited by ThomasI

Share this post


Link to post
Share on other sites

My New Hornby class 66 “Golden Jubilee” on my layout today. One of the most quietest smooth locos I have used.

6D8EA684-D2DB-489B-BBC4-51E7D2599A90.jpeg

B220D90F-358D-449B-966F-C44492CD489A.jpeg

28A72D15-0907-452C-99DF-A2DEBC13753A.jpeg

1ECFA588-31DF-4C59-BAD4-129CA1336906.jpeg

A1B39352-F349-49C4-8A88-06C1E39C23CC.jpeg

A8540FFD-AE7D-421A-8F16-D9F430CC7DE7.jpeg

8C22243E-E300-4FC5-9A9D-1434F708D9FC.jpeg

Share this post


Link to post
Share on other sites

Hi Dean;, you did a great going lengthening those platforms,love your 66 class stunning colour scheme, ish we  had that felt over here.

I haven't had a chance torun my new loco backwards not well asthma is playing up can't stop coughing when I start, seeing the doc tomorrow, hope she gives me prednisone,have had a course of antibiotics.

Hope yu are ok.

 

Tony from down under 

Share this post


Link to post
Share on other sites
Quote

My New Hornby class 66 “Golden Jubilee” on my layout today. One of the most quietest smooth locos I have used.

I've got a couple of these 66 from when they were manufactured by Lima. Quiet and smooth they are not. I re-motored one as an experiment, but it didn't improve things much.

By the looks of things the new 66s have the same motor as the Class 91 I bought a few years back and that can haul a 10 coach train with just two powered axels, so I guess that the new 66's will be equally as impressive.

Share this post


Link to post
Share on other sites

I'm seriously impressed with the new 66's for the price, actually thinking of getting a couple more! Currently trying to add lighting to mine meaning its in bits on my workbench with a load of its chasis hacked away - just hope i havent messed it up!20190528_124137.thumb.jpg.af0d88c7386754d3a8c602a988ec80e2.jpg

  • Thanks 1

Share this post


Link to post
Share on other sites

My Lima 66's are the only locos in my fleet without lights. I thought about adding them, but decided that it was too much like hard work.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×
×
  • Create New...