Jump to content
Sign in to follow this  
aussietmrail

Modelling Tor Corona Ro ,Ro vessel in 87 scale

Recommended Posts

Tony,

I am watching your ship take shape and am really impressed. I watched two new passenger ships being built in a shipyard in Venice for Seabourn and other than you using card and we used 18mm steel the build is almost the same!

I hope you are keeping the ferry company up to date with the build. They would be delighted to see it.

 

cheers

mark

Share this post


Link to post
Share on other sites

HI Mark, good to hear  from you, a question how can I contact you on Facebook, I am under my name  and  pic of me dressed up for a wedding .

I have made more progress, actually made a start on the second section layout the keel for that section and bought  a small bottle of Canadian club Whisky, nice drink.

Ready to cut out the first bulk head, doing it different to the bow section, the water line to the bottom to the main deck be part of the bulkhead, should make the construction stronger, is 18 mm's longer.

Be working on the ship tonight, yeah that is what Thomas said, I am building Corona Sea like she was built, amazing what you said I am using 1 mm card and the real cruise ships use 18mm steel plates, do you have  pics of those cruise ships being built , what I am thinking of building next.

The last pic being the bulkhead marked out with underneath the main deck added.

I have being working on the double deck bridge, have cut out where the brackets the will support the road and the hangers for the main arch, I have marked out the brackets that  the hangers to screwed to, all up both sides of one half of the bridge, it has being very hot here, high 30's all week every week. 

After tea I have being working on the bridge, has cooled down enough to get some stuff done, might finish of the first half of the road deck, still a lot of work ahead, have to make brackets that will screw  the hanger brackets for the rail deck, then there is the arch to build, keep  me busy for the next few weeks till it cools down enough for the Camdale to take shape.

How is your layout doing, are you back on your ship again, let me know as I can track where you are like I can track Corona Sea.

Tony

More on the way next week so no work on Camdale till it gets cooler wont be till March, two weeks of summer left, tonight I will cut out the first bulkhead out glue the two together, mark out the inside panel that will be part of the hull to hold the first one in place.

 

001.jpg

002.jpg

003.jpg

004.jpg

IMG_2490.jpg

IMG_2520.jpg

Share this post


Link to post
Share on other sites

Have come a log way since February, an actual milestone indeed, I have finished the keel and bottom water line plate last night, 14 more bulkheads to cut out and glue in place , looking at the four sections she is turning out to be a stunning ship indeed. I don't think anyone had modeled a ship this size and out of cardboard. I am going to put her into a scratching building competition and see how I go.

Going to start on the stern section and get it out the way, a lot of work in marking out and cutting, like a challenge.

Tony from down under

IMG_2876.jpg

IMG_2880.jpg

Share this post


Link to post
Share on other sites
On 25/04/2019 at 11:51, aussietmrail said:

...looking at the four sections she is turning out to be a stunning ship indeed. I don't think anyone had modeled a ship this size and out of cardboard. I am going to put her into a scratching building competition and see how I go...

You get my vote Tony!

You're right, she's going to look stunning when you get it all together. I hadn't realised you intended modelling the whole thing - for some reason I thought it was just going to be the front section like a low relief effect.

Share this post


Link to post
Share on other sites

I have always wanted to build a container ship or Ro, Ro ship , fell in love with the ship I am modelling, even better I am good friends with the captain he takes a lot of pics of  the decks ramps, some more pics for him to take when he joins the ship again soon.

Quote

You're right, she's going to look stunning when you get it all together. I hadn't realized you intended modelling the whole thing - for some reason I thought it was just going to be the front section like a low relief effect.

 

Thanks , no idea when I will finish building the hull, what to finish it, so I can rebuild the bow section and start on the superstructure and bridge. I am looking at using servo's to work the hydraulic rams on the stern ramps, any ideas, that will blow people away when they see the ramps coming down, got plenty of room where I can hide the servo's

will start work on the last stern bulkhead, be the hardest one, tomorrow night.

Tony from down under

 

Share this post


Link to post
Share on other sites

I am now working on the stern ramp, going to take a while to build, couldn't use cardboard for the framing on the underneath of the ramp, had to use styrene  instead, might have to styrene for the decking of the ramp as well, as you will see in the pic of the  real ship's stern ramp.

First pic the real ship, sister ship to the ship I am modelling ,next pic is a test pic of the ramp closed and next one open, last pic a close up of how I worked out the pin, tooth pick, the bolts I had, even though they were only small still was too big..

There be another bracket on the other side and be think styrene to lock the pin in place, if you look closer at the first pic the end plate  past  the stern bulkhead goes up on an angle and those brackets go down to the top of that plate.

The length of the ramp is 235 mm's in length , all up be4 of those long frames, I still haven't worked out how to power the ramp to open and close.

Tony from down under

IMG_1072  a.jpg

IMG_3060.jpg

IMG_3062.jpg

IMG_3064.jpg

Edited by aussietmrail
Hit the submit in stead of choose files

Share this post


Link to post
Share on other sites

Have finely  made the double deck stern ramp, took three attempts , I had to use a tooth pick for the pins, the smallest I could find, the stern ramp is taking me longer than I thought just as hard as the bow section, which I will rebuild later, glad the ship is in four sections, if I make a mistake can start that section again , is a learning curve as I want to build a radio control model.

Pics one and two and second last pic  gives an idea  on the hinges, can notice more on the single stern ramp which is higher up, my hinges are different,  didn't get the  pics till after I made my hinges, take a closer look there is acap  between the ramp when it is down and the main deck , mine is 7 mm's, I plan to use tape glues to the ramp and the bridge plates for it to work.

Tonight I be starting work on the single ramp, still won't be able to glue the end bulkhead in place till the work on the ramps are finished , I have made the ramp to site 2 mm's lower that the main deck, can see that in the second last pic and ramp ison a 45 degree angle, mine not needed , the last pic showing how big that plate is on the stern, must be to stop wash from the props flooding the main deck 

More progress work tonight , still have hydraulic rams to make, like the m to be working ones,thinking of using heavy string  for the rams, any ideas.

 

Tony from windy down under. 

 

IMG_3331.jpg

IMG_3334.jpg

IMG_3335.jpg

IMG_3336.jpg

66761738_672724586484345_3842441849407012864_n (1).jpg

67159146_408058423146439_8007752947553271808_n.jpg

Share this post


Link to post
Share on other sites

Progress pics have come a lot further ahead sine last post, gee 10th of August 2019 now July 2020 and have moved to a new house since then, I am now working on the second last stern hull section, decided to glue in place four end bulkheads so I can join up  the four hull sections..

WOW she is going to look stunning sitting just past my bridge birthed at   the Ro, Ro dock on my layout , still a couple weeks away to finish this hull section , spent a couple of night  over the weekend to glue those bulkheads in place .

Once this hull section is finished will glue together the two stern sections so I can mark and cut the  starboard side panels will take ship like in the last pic talking about the upper deck to the top deck .

It is pretty cold here and windy no work on the layout, hopefully tomorrow it is warmer.

 

Tony from down under

 

20200712_133635.jpg

20200712_133708.jpg

20200712_133731.jpg

DSC01431.jpg

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

×
×
  • Create New...