Jump to content


  • Posts

  • Joined

  • Last visited

Everything posted by EngineDriver

  1. Hi Tony, the loco is a freelance narrow gauge 0-4-0 diesel such that would be used in a quarry or mine, it's powered by a 3.8hp suzuki petrol engine. I'm sorry but I'm not into boats at all so I'm unable to help with your quest to find your ferry. Glad to hear you've got your computer sorted out, and that you are making good progress with your layout, keep on the good work chap!
  2. This is my "Other" Garden Layout not exactly "OO Gauge" I know but fun never the less. My youngest son Sam driving our train at the local model engineers society track on Sunday 3/09/17 https://www.youtube.com/watch?v=xEKpMlzVCdg
  3. Thanks Griff, I have some more footage to upload when I get a min'
  4. Here is a couple of videos on the Jamestown and Brampton Railroad evening running session. Penn Central local freight train leaving eastern portal through the "Termite Tunnel" Penn Central freight coming down the Brampton Valley Railroad branch to Lander street relief cabin. I hope you enjoy these short videos.
  5. Hi Tony I will try to do the bit of video for you soon re the gravel loader. I'm on windows 7 here I can't get on with windows 10 I had it removed when we had this comp' built last year and 7 re installed. It is nice here at this time of year gets dark about ten pm now, bit earlier if it's been a grey rainy day though! .....Hate winter, gets dark at about 4.30pm cold miserable damp dark days! makes me depressed just thinking about it!
  6. Tony, the hoppers are loaded at "Lonesome Pine Agg' & Lumber" under the "Flood" loader a picture of which is on the first page of this thread, I will try to upload a bit of video of it actually working when I get a moment! Regards Nige.
  7. Yes Tony, the loaded hoppers leave the "Lonesome Pine Agg' & Lumber" yard and are tripped around to "Jamestown West Yard" where they are made up into a train usually consisting of 18 loaded 40ft hopper cars and a caboose then loco's are attached and the train departs for "Brampton" (which is where the unloader is situated as part of a small cement works) the journey is usually one full circuit of the layout then it proceeds up the " Brampton Valley Railroad" branch, the driver gets relieved at the bottom of the branch at "Lander Street" relief cabin. A "BVR" driver takes the train up the branch from there. There are always at least two loco's on each train as the branch is steeply graded. Upon arrival at "Brampton" the train is broken up and switched into the "South Yard" and then from there they are tripped round to the cement works for unloading as required! ......And great fun is had by all !!!!
  8. Hi Tony, the dumper is to be used for unloading stone from the short line on another part of our layout. It has worked on and off for a while but not very well and recently it packed up altogether! so I have had to re build the drive system and modify it so that it works better, hopefully it will be ok now.
  9. Finally I have managed to get this "Walthers" rotary unloader to work reliably. It's only taken the best part of two years! It must be one of the worse kits I have ever encountered, I have had to modify it almost beyond all recognition, and it was not cheap to start with! It was one of those jobs that once you had started you wish you had never seen but by then you are too far in to go back! Sorry video is a bit wobbly but I was trying to film and operate train and unloader all at same time! https://youtu.be/2vFIgBS2es8
  10. WOW Mark you have been busy! I'm very pleased to see you have decided to go for a ground level approach, much safer for you that way.............................not a ladder in sight!!!!
  11. Thanks Mark, and yes Griff it is an "Athearn" model usual bullet proof motor and running gear etc! Just right for outdoor running
  12. I bought this from "Ebay" a few weeks ago for the princely sum of £14.50! As you can see it had been crudely and thickly painted with some gloss yellow and blue paint. It had also been fitted with British type couplings. So it entered our workshop where a complete rebuild was undertaken:- It was completely stripped to its component parts and cleaned thoroughly, and all paint was removed. The internet was then used to get the correct number sequence for the company that we are running at the moment. Upon rebuilding it was discovered that it had a faulty wheel-set which caused it to de-rail on points and on uneven track, so a spare set was installed from a scrap SD40-2 I think it's turned out pretty well in the end, these next two shots show the the completed loco at rest in "Jamestown East Yard" Not bad for £15.00!!
  13. Hi Griff we've not spoke in a while, really sorry to read about your Dad. I lost my Dad over 20yrs ago..............still hurts like hell! Best regards Nige.
  14. Hi Tony, sorry to hear you are not well, being in constant pain is no fun at all mate as I can vouch for myself. I suffer with back pain most of the time as a result of a motorcycle incident in my younger days and now I have also developed sciatica which has taken pain to a whole new level, that said though, I am enjoying a (relatively) pain free period at the moment. We are hoping to have a running day this Friday (23rd) but the weather forecast says there is a big storm approaching our little island Thursday night and into Friday and then another one on Christmas Day They never normally get it right but you can bet your bottom dollar they do this time!
  15. Hello Ilkeston, welcome to the forum from Chesterfield If you used to work on the P.W then building an outdoor layout will be a doddle! It's just like the real thing only smaller (obviously!) foundations to put in, drainage to consider, weather proofing electrical stuff, and then general maintenance as time goes along, only now you don't have to set up a "possession" or make sure you hand it back on time! I have to pop over to Ilkeston on Thursday to Malc's Models for some Kadee couplings, I used to be able to get them in Sheffield which is a lot closer but the shop closed down Only other thing is we like lots of photo's /video so we can see what you are up to, ok? All the best for now Nige.
  16. Amazing Tony, I keep looking at your progress, didn't realise you had been at it that long though I think I would have given up by now! Well done mate, keep going it will be worth it in the end! Nige.
  17. Hi Mick and Tony, thanks for your comment we have been quite busy with the layout lately, taking advantage of the mild weather. I will get my son to take some up to date video and will post it as soon as we can. Regards Nige.
  18. Sheds are great they are so easy to extend or modify with only the most basic of woodwork skills, in fact if you can construct a model railway then you can almost certainly build a shed. We started off with an 8ftx6ft shed that was given to us free of charge, it need a bit of work but was basically ok eventually it was extended to it's present size of 20ft x6ft. This was easily done by acquiring another 8ftx6ft shed and removing the back of one shed and the front of the other then inserting a 4ft section in the middle giving 20ft overall. Two steel roof trusses were made from angle iron, one placed where the end of the first shed is/was and the second placed where the second shed started, or either end of the 4ft section if you follow what I mean!!! 3/4inch ply was used for the floor throughout, and a complete new roof made of OSB board was also fitted, and I always fit guttering and down pipes. Oh yes and it's no where near big enough!!!!
  19. Normal in the U.S. Griff perhaps, but with the exception of the war, Express loco's were painted Green or Blue or Maroon or whatever the company colours were, only freight/mixed traffic loco's were painted black. I never understood why they painted Express loco's black during the war years you would think people need cheering up as much as possible not depressing more by painting everything BLACK! Also why only put N.E on the tender instead of L.N.E.R? is there a drawer full of letter L's & R's somewhere yet to be found?
  20. B.R. Brunswick Green for me! I also prefer them without the side valences as well, so it would have to be the later liveries.
  21. Hi Mark and welcome to the forum, I must say I'm very impressed with your layout, do you leave the buildings out all the time or do you take them in after each running session? More photo's required please Best regards Nige.
  22. I must say this is all very ingenious, are these servos cheap to buy? It does seem a bit of a faf to set up though. I have been using "OO" outdoors for the best part of 20yrs and I have always just used normal point motors with no problems whatsoever. I use H+M sm3 motors and Peco both surface and under board mounted, just give them a squirt with WD40 now and again and that's it. The H+M one are becoming harder to get hold of these days but they can still be found at swap-meets and Ebay I must admit I prefer them because you can dismantle them pretty much completely if there is an issue, making them easy to repair.
  23. I wasn't going to mention that, Q, I have a feeling he might still be a bit saw.......... I mean sore!!!!
  24. Mark (baimor) is excellent at aerial photography...................ask him to show you his collection he took of his layout
  25. Hi welcome to the forum, don't be afraid to ask questions or for any advice there's tons of experience on here and chances are anything you want to do will have been done by someone before and they will be able to guide you along if need be. Also we like pictures, lots of pictures ok? Regards Nige.
  • Create New...