Jump to content

Archie

Members
  • Posts

    64
  • Joined

  • Last visited

  • Days Won

    6

Everything posted by Archie

  1. The local model shop tends to have a good supply of used peco points in my area at a good discount. I have always found good deals on Clark Railworks for trains although you will probably find customs and duty ruins any value proposition.
  2. I recorded 40.5 oC in the car yesterday. I'm sure its partly due to the sun. In the next hour we are expecting thunder and lightning, its crazy.
  3. After a bit of a hiatus from the layout, I ended up making some acquisitions including an airfix class 31, 8 china clay wagons and a gorgeous blue Pullman set. First to run was the blue Pullman. This model is a full western 6 car set including the 2 parlour cars. One of these cars is a converted triang coach and the other a converted kitmaster coach. The locomotive itself runs very well but trying to run the whole train was unsuccessful with it derailing at multiple times around the loop. I think the solution in future will be to run a shortened set down to 4 cars. Here it is pictured still. Other than that I have also acquired an airfix class 31 which is not the smoothest of runners but its nothing a good service cant sort. Behind is a rake of 8 china clay wagons I have got my hands on. I have made new hoods but they are yet to be painted. Yet another project to add to my list. Finally I got out my class 37 as I wanted some hassle free running. I tried a black and white filter here and I think it is rather effective, the second shot pictured from the signal box makes it seem as if the train is longer thanks to the end being out of shot. Due to the operational issues I did not manage to get any footage but I plan on doing a video once I rectify the issues.
  4. If I am honest this is a little out of my depth here. If you were to ask on rm web you'd probably get a wider range of replies, with that said it looks like the power is being passed through some diodes before being passed through a series of transistors that then change depending on the direction of travel and the signals of the decoder. This signal then somehow makes it to the lights. Is it possible that there is other components or traces on the other side of the board? from this view it looks like some of the traces terminate at nowhere. Maybe that would show a clearer picture of what is happening.
  5. Having a deeper dig this diagram from this RM web thread seems to show how be in a simple form the lights would connect to the decoder, unfortunately I think there is a little more to it because, as you mentioned, there is only two connections between the cars of the DMU. It would be useful to know, do the lights activate as the result of one function on the decoder (ie - does one function activate the lights for both the front and rear and change depending on the direction of the train? If they do, if I were to hazard a guess to how it works I would say that the diagram I drew probably still applies and all the processing that takes these three outputs is done on the main PCB in the drive car and then the output is sent over the two connections to the dummy car. I hope what I have said has kind of made sense here. https://www.rmweb.co.uk/topic/132094-wiring-white-red-smd-leds/
  6. Having a look online I can't seem to find an image of the dummy car with the body off. But in its simplest form, the wiring for the lights would look like this. if the lights are controlled buy the decoder my best guess would be that the connection to the locomotive would end up going to the pcb and then to the decoder. If they are dumb then the connection to the locomotive would most likley just go to the pickups. Not having one nor anything similar I couldn't tell you exactly how it works but this would be my best guess.
  7. The p9600 is discontinued. There is a power supply that is sold to be paired with the HM6000 but it is less powerful and costs more. With that said the HM6000 seems to already be on sale in some retailers so that cant be a good sign for its success. If you want to see the features I suggest you watch a video on it as it can probably explain all this in a lot more detail.
  8. There is a stop all button which cuts all power Immediately and allows you to change the controls and restart if there is a problem. The range is really good. I have managed to get about 10m away before it cut out. all it needs is (relative) line of sight (eg no walls, but plants it can deal with) and if it disconnects I'm pretty sure the train stops. One thing to take into account is that it uses pwm control of the trains instead of analogue control and so the trains have a slight hum when running at low speeds. Another thing to take into account is that it has very sensitive short circuit detection so it sometimes stops the whole system when traversing a point which can become rather frustrating although it can be fixed with some paint around the frog of the point. Other than that it is quite a good system for the low price (£25 on amazon + £15-25 for the transformer). I have managed to get a discontinued P9600 transformer that is cheaper and has a higher power output for £15 at the model shop. I think there is still a couple shops online that are selling them off as old stock so if you can find one, they are your best bet.
  9. Since last posting I have made considerable progress and have fully completed the fiddle yard: Each road can hold a 5-6 coach long train and the return loop can hold a 12 coach train when not in use. Each track can be isolated individually to allow 5 trains to be operational at any one time. Because each half is separated by a return loop two trains can run at once if I cut the line in half. This also means that I can run trains without having to clean the whole line if I dont want to use half. Something else that's new is the Hornby HM6000 controller. My old H&M controller has started to falter and so I thought Id try something a little different this time. A while ago I created a similar Bluetooth controller with an Arduino but It was quite clunky and so I reverted back to a regular controller. The benefit of the Bluetooth controller outside is that I can move around whilst still being in control and this Hornby one does a pretty good job at it. I can control the trains all the way from inside the house with the controller at the other end of the garden. The inertia control is also a very cool feature that is not gimmicky at all. The other features like the sound are not very good although the horn I find myself sometimes using. We will have to see how it holds up in the long term but from what I can see its rather good for the price (if you exclude the fact that you have to buy the power supply separately). Unfortunately, I feel like it is something we have come to expect with Hornby.
  10. Honestly I think you are better off saving the money and getting regular ply, then seal it with a fence paint and then potentially covering with felt. One of the advantages of felt is that it is able to cover any imperfections or rough edges of the wood; and as Chris said, it looks a little like ballast without having to put in much effort. With this said no method is the be all and end all and you should feel welcome to try any new method you want.
  11. I'm sure the shininess could be a factor, I find the pigeons poo on whatever is underneath the tree branches. Ive found it on the covers that I use to cover the particularly badly effected spots, and also around the grass and flowerbeds so it seems that they dont mind to much.
  12. over the last couple of days I have made even more progress on the railway: I have felted the new board in the corner and relaid the return loop to allow trains to run again. Only after laying the track did I realise that I had bought an electrofrog point instead of an insulating point! It took me a while to figure out what was shorting the system, I will need to pull that out and replace it. after that I have started work on the storage yard boards. These will be removable with hinges with removable pins connecting the sections. I need to figure out a way to secure the tracks at the end of the baseboards at the joining sections, I have seen it done by soldering the track to pcb boards so I will give that a try.
  13. Whilst many have been enjoying running trains in the heat we have been getting, I have lifted the track at the top and started work on the extension to the other flowerbed. First, the track at the top was lifted and the old board cut in half... ... Then the new board went in with a spur to go onto the new boards. The loop track is now second radius at this point and so probably not suitable for some stock but that should not be a problem as the main running lines will be third radius and above. Here you can also see the new point, which has been installed connecting what once was the siding and the loop line. The ply sections are to become a five lane storage yard with return loop for the other half of the railway. This means that both halves of the railway can run separately allowing two trains to run at once.
  14. brass pins are ideal. steel pins rot away however much you protect them and screws are probably too fiddly, although you could give them a go and that area of garden looks great for a railway, its definitely not to small.
  15. Its nice and sunny today again so I may get trains running 2 days in a row, with that said the weights for my 3D printed wagons have arrived so it may be worth trying to finish some of them off. To be fair the Hymek is a loco that I also dont know much about, I have only been looking for one as I think they look quite elegant, especially in green.
  16. Recently I have managed to get a Heljan hymek. Although it was sold as new I have a feeling that it has never been used as the headcodes had not been installed nor cut out and all the detailing and couplings were all in their packs so it seems like a good buy. As the weather has been good I have been able to get it running and I have made a short video.
  17. https://trademarks.ipo.gov.uk/ipo-tmcase/page/Results/1/UK00003742051 Recently this logo has surfaced, potentially as part of the new branding for Great British Railways. I think it would be interesting to see what people think. personally something looks off with how the blue lines up because of how it tries to incorporates the union jack. I wander how it could translate onto a livery or brand, you'd end up with something that looks like an RTC livery if you transpose those colours onto a train. Maybe it will just end up an insignia like the old arrows, we will just have to wait and see.
  18. After a long brake, I've finally got round to ordering the rest or the parts and have finished the first wagon. Admittedly its quite rough but considering the price of around £7 each they dont look too bad. This one is missing a coupling on one end and some underframe detail due to the print failing. In reality the colour is not as bright, its more of a brick orange and standing in the garden it doesnt look too bad behind a class 60 or 37. This one still needs a load after I add the weights.
  19. That was probably a bit misleading, the viaduct itself is going to be 5-10 metres but the whole length is around 15 metres. I included the embankment in the 15m which I was also considering to do on blocks although it may be easier to do it with wood like the rest of the layout, and then fill the void with rubble to build up an embankment. The only issue I have is the amount of space through the flowerbed being significantly thinner than the bed on which the rest of the layout is situated making a realistic embankment hard without filling the whole bed with dirt. A single track viaduct would probably not work as I am using DC and would rather avoid the complicated wiring, it also means the track can't be split into block sections as easily for multiple train running. One option would be to squeeze the parapets as far out as possible and run a length of gauntlet (overlapping) track across the viaduct to keep the tracks separate. But again it would make multiple train running hard, but in that case not impossible. One option, as Roddy said, is to put a wooden track bed over the top of the blocks, and as I only need an extra few centimetres or so it wouldnt look too bad either. Again though, just like the double blocks, it adds an extra layer of complexity to the build.
  20. I had that thought, the only problem I see is keeping the block in the gap level whilst its drying. With that said it may save on costs, doing 2 lines of bricks over 15 metres would start to get costly.
  21. It will most likley be a viaduct type structure from about where the bay tree is as you can see on the pieces of wood that are level with the current track it is much lower than your viaducts but is still too high to just sit on solid blocks or to float in the air. I think I could potentially align the two sides with bolts if it were constructed and then use the hole saw or rasp method to get the curves, or I could try to build another kind of bridge, maybe a girder bridge would be more suitable?
  22. Seeing as your viaduct has stood the test of time, I think its likley the next raised section of my railway will likley use a similar brick block method. The big problem with the design is that I will need twin tracks over a single viaduct and with the blocks seeming to be 10cm wide I dont think Ill be able to get both tracks across with clearance. My question is, do you think it'd be easier to rotate the bocks sideways so the longer sides are abut together or would it be better to double up the blocks. I have found some aerated bocks that are 7.5cm wide so the latter would give a track bed that is 15cm wide which seems more reasonable than 10cm.
  23. Those rusted panels look really effective, I'm sure there must have been some with panels that were worn more than the rest on the wagon. The sponge effect looks very believable aswell, they add some coarser texture thats looks more than just surface rust that tends to be depicted on models.
  24. Each shell takes 14 and a bit hours each so you are pretty much bang on there with the time. for mine I have sanded down every visible side, The prints are very accurate but they all have visible layers because of how the item is created. You can now get resin printers that are priced fairly reasonably that produce models with the same level of detail and quality as a traditional resin model, so around as good as an injection moulded part but I chose a more traditional FDM printer that extrudes plastic filament in layers at it is more versatile. ( the printed items are much stronger and you can print in a wider range of materials and colours). sanding for each one takes around 15-20 minutes, although I go over it in the rough sections after every coat of paint, so the total time is probably closer to 30-40 minutes each.
  25. I've been printing these wagons pretty much constantly for the last week, so I now have 8 bodies, although I have run out of screws to put them together so I can't start sanding and painting the rest until I get all the bits in. I have managed to paint one wagon, its not the smoothest or most even paint job but I think it'll do, although it definatley needs toning down with some weathering.
×
×
  • Create New...