Jump to content

Leaderboard

Popular Content

Showing content with the highest reputation on 04/03/2021 in all areas

  1. Hi, I have now made a prototype using a simplified circuit which charges from a buffer stop into the loco buffers these are modified to steel with leads going into the on board control circuit. The track buffer stop is modified with molibium magnets 3mm dia x 3mm long. these make good electrical contact with the loco buffers, the buffers have a few mm movement to allow for poor alignment. the loco can be recharged or set to run by the changeover switch. If the loco is running towards the buffer stop and the switch is set to charge then the loco switches off soon as co
    1 point
  2. Western Harrier - the video
    1 point
×
×
  • Create New...