EngineDriver Posted December 14, 2016 Author Share Posted December 14, 2016 Amazing Tony, I keep looking at your progress, didn't realise you had been at it that long though I think I would have given up by now! Well done mate, keep going it will be worth it in the end! Nige. Link to comment Share on other sites More sharing options...
aussietmrail Posted December 14, 2016 Share Posted December 14, 2016 Hi Nige, many thanks, what I like to hear that will keep me going, my wife said it will never be finished, but it will, it took Mick 3 years to complete his layout, do a bit at a time and not rush it will all come together, can't wait for the first train to run around the whole layout. Like you it is too bloody cold opposite too bloody hot here , a few days of heat coming in cool change on Monday and Tuesday, give me time to get over what is wrong with me, at the moment can't walk too well in pain seeing the specialist today. This will give me time to draw up a second station building not as big as Sydney Central.. Keep warm Nige. Tony from down under keeping on moving ahead Link to comment Share on other sites More sharing options...
EngineDriver Posted December 21, 2016 Author Share Posted December 21, 2016 Hi Tony, sorry to hear you are not well, being in constant pain is no fun at all mate as I can vouch for myself. I suffer with back pain most of the time as a result of a motorcycle incident in my younger days and now I have also developed sciatica which has taken pain to a whole new level, that said though, I am enjoying a (relatively) pain free period at the moment. We are hoping to have a running day this Friday (23rd) but the weather forecast says there is a big storm approaching our little island Thursday night and into Friday and then another one on Christmas Day They never normally get it right but you can bet your bottom dollar they do this time! Link to comment Share on other sites More sharing options...
aussietmrail Posted December 21, 2016 Share Posted December 21, 2016 Thanks Nige, my pain has gone now too, a bugger yo are having back trouble, good to hear you are pain free too. What the name of your island north o south of England, I can drop in for a visit on Google earth, We are copping storms as well in the afternoon pretty warm one today 37 degrees and humid as well, hopping to mow the grass in the afternoon and the downside of battery mowers can't mow wet grass, grass is growing pretty fast, after tomorrow the days are cooler to Christmas, set up the last two approach modules, finished of screwing the sides on the last module Monday. Merry Christmas to you and your family. Tony from down under keeping on moving a head Link to comment Share on other sites More sharing options...
EngineDriver Posted July 4, 2017 Author Share Posted July 4, 2017 (edited) Finally I have managed to get this "Walthers" rotary unloader to work reliably. It's only taken the best part of two years! It must be one of the worse kits I have ever encountered, I have had to modify it almost beyond all recognition, and it was not cheap to start with! It was one of those jobs that once you had started you wish you had never seen but by then you are too far in to go back! Sorry video is a bit wobbly but I was trying to film and operate train and unloader all at same time! https://youtu.be/2vFIgBS2es8 Edited July 4, 2017 by EngineDriver Link to comment Share on other sites More sharing options...
aussietmrail Posted July 5, 2017 Share Posted July 5, 2017 Hi Nige, great to see coal dumper actually working gee taken you a couple of years to get working be great as a scene in stream loco service facility, eye catching as well, what do you plan to model. I just finished building a cross cutting jig for my circular saw making it a lot easier in getting that square cut every time, tomorrow I be using it for the first time cutting strips of ply for the hinges to screw onto the module legs, pics on my post. Tony from down under keeping on moving ahead. Link to comment Share on other sites More sharing options...
EngineDriver Posted July 6, 2017 Author Share Posted July 6, 2017 Hi Tony, the dumper is to be used for unloading stone from the short line on another part of our layout. It has worked on and off for a while but not very well and recently it packed up altogether! so I have had to re build the drive system and modify it so that it works better, hopefully it will be ok now. Link to comment Share on other sites More sharing options...
aussietmrail Posted July 6, 2017 Share Posted July 6, 2017 HI Nige, that be awesome are you going to have extra siding to shunt the empty wagons, I like to have an operating container yard, nice to dream, will be making the most of the nice winter day ahead. Tony from down under Link to comment Share on other sites More sharing options...
EngineDriver Posted July 6, 2017 Author Share Posted July 6, 2017 Yes Tony, the loaded hoppers leave the "Lonesome Pine Agg' & Lumber" yard and are tripped around to "Jamestown West Yard" where they are made up into a train usually consisting of 18 loaded 40ft hopper cars and a caboose then loco's are attached and the train departs for "Brampton" (which is where the unloader is situated as part of a small cement works) the journey is usually one full circuit of the layout then it proceeds up the " Brampton Valley Railroad" branch, the driver gets relieved at the bottom of the branch at "Lander Street" relief cabin. A "BVR" driver takes the train up the branch from there. There are always at least two loco's on each train as the branch is steeply graded. Upon arrival at "Brampton" the train is broken up and switched into the "South Yard" and then from there they are tripped round to the cement works for unloading as required! ......And great fun is had by all !!!! Link to comment Share on other sites More sharing options...
aussietmrail Posted July 9, 2017 Share Posted July 9, 2017 Hi Nige, wow can't wit to see a video, are you under way in building the cement works or is finished, don't forget those pics, I be doing a few laps of my layout when running the Indian Pacific will time how long it takes to run around the whole layout, and when I build the second extension to the layout, be a big change, have put in place for that to happen. How are you planning to load the hoppers be interesting what you come up with, I have a friend that built a full working loader awesome to see in action, he also invented his own kadees that were able to turn while still connected the train when going through the tipper like yours, I will get some pics and video if you are interested.. Progree is slow on my layout, painting the top of the first approach module car port end and starting over again laying points, track and the bus wiring never ending getting there. My cross cutting jig worked well on Saturday speeding up in cutting more than one piece of ply at once, pics on my post. Tony from down under keeping on moving ahead. Link to comment Share on other sites More sharing options...
EngineDriver Posted July 11, 2017 Author Share Posted July 11, 2017 Tony, the hoppers are loaded at "Lonesome Pine Agg' & Lumber" under the "Flood" loader a picture of which is on the first page of this thread, I will try to upload a bit of video of it actually working when I get a moment! Regards Nige. Link to comment Share on other sites More sharing options...
aussietmrail Posted July 12, 2017 Share Posted July 12, 2017 Hi Nige, went back and had a look awesome, do you have any more pics of the gravel loader, and a video of it in action be nice to see, you can spend hours just on that scene and going around to the tipper, I want to model wheat silo siding . I was getting worried that I was having trouble with my lap top keys on Andrews post earlier had to give up was going crazy, entre key was deleting the line I just typed not happened a few times, I am not sure if could be windows 10 edge being the problem, you have issues as well, working fine now. What is the weather like in the UK now, you guys are lucky the sun sets at 9pm in summer, nice to have those extra hours on the hobby in Western Australia sun sets 9pm , here on the east coast around 6.30pm. Tony from down under keeping on moving ahead. Link to comment Share on other sites More sharing options...
EngineDriver Posted July 12, 2017 Author Share Posted July 12, 2017 Hi Tony I will try to do the bit of video for you soon re the gravel loader. I'm on windows 7 here I can't get on with windows 10 I had it removed when we had this comp' built last year and 7 re installed. It is nice here at this time of year gets dark about ten pm now, bit earlier if it's been a grey rainy day though! .....Hate winter, gets dark at about 4.30pm cold miserable damp dark days! makes me depressed just thinking about it! Link to comment Share on other sites More sharing options...
EngineDriver Posted July 27, 2017 Author Share Posted July 27, 2017 Here is a couple of videos on the Jamestown and Brampton Railroad evening running session. Penn Central local freight train leaving eastern portal through the "Termite Tunnel" Penn Central freight coming down the Brampton Valley Railroad branch to Lander street relief cabin. I hope you enjoy these short videos. Link to comment Share on other sites More sharing options...
aussietmrail Posted July 28, 2017 Share Posted July 28, 2017 Hi Nige, be looking forward to seeing the working video on your gravel loader, I will ask my friend in the US if he can send me a link to his grave loader , he uses those tortoise point motors on his loader. Gee you are luck to have those long summer days, pretty hard to send kids to bed at 8pm when it is still day light, it starts getting dark around 5pm in winter, 7pm in summer, as well the days are getting longer now , being around 26 degrees that will change when the Ekkie is on mid August the westerlies start rolling in and they are cold., I stay indoors can upset my asthma.last month of winter. be working on the bus wiring today on the first approach module, tried out a mock-up point plan on the next module working out well, can't wait to run the passenger trains through the points and cross overs leading into the platforms , yeah those short videos are pretty good. Pretty soon you will have switch back to windows 10 when micrsoft stop supporting win7 my son is switchinbg early next year to wn10 , he is a heavy gammer, his computer is built for gamming. We could of gone back to win8 too much trouble, not all happy though the latest big up-dates hove knocked out my Power DVD15 and my Paint shop pro shortcut doesn't work and no spell check Tony from down under keeping on moving ahead Link to comment Share on other sites More sharing options...
traingeekboy Posted August 30, 2017 Share Posted August 30, 2017 I like video number 2. I live very close to the BNSF joint line in Denver. Was watching your railway with the sound off and suddenly I hear diesel horns in the distance. he he he Very realistic! Link to comment Share on other sites More sharing options...
EngineDriver Posted September 1, 2017 Author Share Posted September 1, 2017 Thanks Griff, I have some more footage to upload when I get a min' Link to comment Share on other sites More sharing options...
aussietmrail Posted September 2, 2017 Share Posted September 2, 2017 Hi Nige, be looking forward to seeing the latest video. Tony from down under keeping on moving ahead. Link to comment Share on other sites More sharing options...
EngineDriver Posted September 3, 2017 Author Share Posted September 3, 2017 (edited) This is my "Other" Garden Layout not exactly "OO Gauge" I know but fun never the less. My youngest son Sam driving our train at the local model engineers society track on Sunday 3/09/17 https://www.youtube.com/watch?v=xEKpMlzVCdg Edited September 3, 2017 by EngineDriver Link to comment Share on other sites More sharing options...
aussietmrail Posted September 5, 2017 Share Posted September 5, 2017 Hi Nige, Wow nice to hear you have interest in larger scales, that scale can be very expensive a few thousand over here , out of my reach what type of loco is it . I am using Chrome to be able to have spell check , the last big win 10 update knocked it out using Edge, but it took some effort to log on , cap lock doesn't show up, if I hold the button down for my whole password wont accept it. My layout is coming along nicely working on the third car port end module back into it tomorrow. Are you into boating, I am trying to chase a plan of the model Ro, Ro ship I want to model the class is MSG 113 class Tor Jutlandia based in London , Fin line have the class nice looking ship mixed cargo trucks and containers. Tony from down under keeping on moving ahead Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now